Grundmaterial: | FR-4 1.6mm Kupfer 1oz |
---|---|
Brett-Stärke: | 1.6mm-5.0 |
Schicht: | 1-24 Schichten |
PWB-Standard:: | IPC-II Standard |
Brettgröße: | Kann besonders angefertigt werden |
Markenname: | Yizhuo |
---|---|
Grundmaterial: | Aluminiumbasis |
Kupferne Stärke: | 1/2oz |
Peelable: | 0.3-0.5MM |
Profilieren des Lochens: | Wegewahl, V-CUT, schrägend ab |
Markenname: | Yizhuo |
---|---|
Grundmaterial: | Aluminiumbasis |
Kupferne Stärke: | 1/2oz |
Peelable: | 0.3-0.5MM |
Profilieren des Lochens: | Wegewahl, V-CUT, schrägend ab |
Markenname: | Yizhuo |
---|---|
Grundmaterial: | Aluminiumbasis |
Kupferne Stärke: | 1/2oz |
Peelable: | 0.3-0.5MM |
Profilieren des Lochens: | Wegewahl, V-CUT, schrägend ab |
Produktname: | Kundenspezifisches Aluminium führte PWB |
---|---|
Profilstanzen: | Wegewahl, V-CUT, schrägend ab |
Siebdruck: | weiß, schwarz, gelb |
Elektrische Prüfung: | Befestigung/fliegende Sonde |
Oberflächenveredelung: | HASL, OSP, ENIG, Goldfinger |
Schicht: | Einlagig |
---|---|
Kupferne Folienstärke: | 0.5oz- 6oz |
Wärmeleitfähigkeit: | Leitfähigkeit 1,0 - 3.0W/m.k |
Standard: | ISO9001: 2008, ROHS, UL |
Geführter PWB-Brettgroschen: | Runde/quadratisches/Gewohnheit |
Grundmaterial: | Aluminiumbasis |
---|---|
Kupferne Stärke: | 1/2oz |
Peelable: | 0.3-0.5MM |
Profilieren des Lochens: | Wegewahl, V-CUT, schrägend ab |
Service: | One-stop Service |
Grundmaterial: | Aluminiumbasis |
---|---|
Kupferne Stärke: | 1/2oz |
Peelable: | 0.3-0.5MM |
Profilieren des Lochens: | Wegewahl, V-CUT, schrägend ab |
Service: | One-stop Service |
Produktname: | Geführte PWB-Aluminiumbretter |
---|---|
Profilstanzen: | Wegewahl, V-CUT, schrägend ab |
Siebdruck: | weiß, schwarz, gelb |
Elektrische Prüfung: | Befestigung/fliegende Sonde |
Lochtoleranz: | PTH: ±0.075, NTPH: ±0.05 |
Produktname: | 12W führte PWB-Brett |
---|---|
Profilstanzen: | Wegewahl, V-CUT, schrägend ab |
Siebdruck: | weiß, schwarz, gelb |
Elektrische Prüfung: | Befestigung/fliegende Sonde |
Lochtoleranz: | PTH: ±0.075, NTPH: ±0.05 |